The Quinta Studio 1/32 Ju 88A-4 3D-Printed & Coloured Interior (QD32114) is a premium detail-upgrade set designed to enhance the cockpit and cabin interior of the 1:32-scale Junkers Ju 88A‑4 model (for compatibility with the corresponding kit from Revell).
This is not a full aircraft kit, but a 3D-printed, coloured interior and decal set — meant to replace or supplement the standard plastic interior for a more realistic, display-ready cockpit.
It’s designed specifically for the Ju 88A-4 as rendered by Revell, so it matches that kit’s interior layout and geometry.
Highly detailed interior surfaces — 3D-printed and fully colored components (bulkheads, floorboards, cockpit sidewalls, internal structure). This gives depth and realism far beyond simple flat-printed decals or bare plastic.
Pre-painted detail — because it’s coloured and 3D-printed, you don’t need to assemble complex “sandwich” layers or rely on delicate painting of tiny details (as with resin/photo-etched upgrades). This reduces preparation time while improving finish quality.
Improved realism under canopy / open-cockpit display — the upgrade dramatically improves the visual fidelity of the cockpit and fuselage internal surfaces, which is especially noticeable if the canopy will be posed open or if the model is displayed at close viewing.
This QD32114 set is ideal if:
You’re building the Revell Ju 88A-4 in 1/32 and want a display-quality build with accurate interior detail.
You plan to display the model with the canopy open, or want interior detail visible under lighting.
You prefer less paintwork and less hassle compared to resin/photo-etched upgrades — but still want superior realism.
Because this is an interior upgrade only, you still need the base Ju 88A-4 kit. The QD32114 does not include external parts, fuselage, wings, landing gear, etc. Always order alongside the correct base kit.
As with all aftermarket parts: careful fit-check and gentle handling are recommended, especially for 3D-printed pieces — alignment and test-fitting matter.
Some painting/weathering may still enhance realism (e.g. highlighting worn metal, control-panel buttons, seatbelts, etc.), depending on how you want the final build to look.
If you care about scale fidelity, realism, and display-quality results, the Quinta Studio QD32114 interior upgrade is well worth it. For a bulletin-board shelf piece, or if you plan to reveal internal detail, it’s a major step up over the standard kit interior.
If you like — I can also draft a short “pros & cons” summary of this upgrade (e.g. realism vs cost / complexity) to help buyers decide if it’s worth adding to their build. Do you want me to build that now?
The Quinta Studio 1/32 Ju 88A-4 3D-Printed & Coloured Interior (QD32114) is a premium detail-upgrade set designed to enhance the cockpit and cabin interior of the 1:32-scale Junkers Ju 88A‑4 model (for compatibility with the corresponding kit from Revell).
This is not a full aircraft kit, but a 3D-printed, coloured interior and decal set — meant to replace or supplement the standard plastic interior for a more realistic, display-ready cockpit.
It’s designed specifically for the Ju 88A-4 as rendered by Revell, so it matches that kit’s interior layout and geometry.
Highly detailed interior surfaces — 3D-printed and fully colored components (bulkheads, floorboards, cockpit sidewalls, internal structure). This gives depth and realism far beyond simple flat-printed decals or bare plastic.
Pre-painted detail — because it’s coloured and 3D-printed, you don’t need to assemble complex “sandwich” layers or rely on delicate painting of tiny details (as with resin/photo-etched upgrades). This reduces preparation time while improving finish quality.
Improved realism under canopy / open-cockpit display — the upgrade dramatically improves the visual fidelity of the cockpit and fuselage internal surfaces, which is especially noticeable if the canopy will be posed open or if the model is displayed at close viewing.
This QD32114 set is ideal if:
You’re building the Revell Ju 88A-4 in 1/32 and want a display-quality build with accurate interior detail.
You plan to display the model with the canopy open, or want interior detail visible under lighting.
You prefer less paintwork and less hassle compared to resin/photo-etched upgrades — but still want superior realism.
Because this is an interior upgrade only, you still need the base Ju 88A-4 kit. The QD32114 does not include external parts, fuselage, wings, landing gear, etc. Always order alongside the correct base kit.
As with all aftermarket parts: careful fit-check and gentle handling are recommended, especially for 3D-printed pieces — alignment and test-fitting matter.
Some painting/weathering may still enhance realism (e.g. highlighting worn metal, control-panel buttons, seatbelts, etc.), depending on how you want the final build to look.
If you care about scale fidelity, realism, and display-quality results, the Quinta Studio QD32114 interior upgrade is well worth it. For a bulletin-board shelf piece, or if you plan to reveal internal detail, it’s a major step up over the standard kit interior.
If you like — I can also draft a short “pros & cons” summary of this upgrade (e.g. realism vs cost / complexity) to help buyers decide if it’s worth adding to their build. Do you want me to build that now?
